ABSTRACT The attempt to face the limitations of wood-based materials, especially concerning the relationship with water, is still a considerable gap in research on this subject. The present work proposes the accomplishment of thermal treatment in fiberboard-type hardboard, using different temperatures and times, to evaluate the effect on the physical-mechanical properties. The parameters of the heat treatment were temperatures of 120 and 160 °C and times of 20 and 40 min. The hardboards were individually heat treated in a kiln. The characterization was performed from physical tests such as bulk density, moisture content, water absorption (2 and 24 h), thickness swelling (2 and 24 h); and mechanical properties of flexural strength. The treatment with a temperature of 160 °C for 40 min showed the lowest values of water absorption in 24 h (34%). Thickness swelling was lower compared to control, for all the treatments applied. Regarding flexural strength, the treatment that adopted the 160 °C for 20 min showed the highest MOR value (26.3 MPa). In general, the performance of heat treatments positively influenced the physical and mechanical properties of the hardboards, being an interesting alternative in the development of products for applications in internal environments.

Abstract The aim to evaluate the raw material (agroforestry residues) for particleboard manufacture from the: pseudostem of Musa paradisiaca; the stem and pods of Theobroma cacao; and the sawdust of Ceiba pentandra. The particleboards produced from these cellulosic residues are mixed with cassava starch’s natural adhesive and urea formaldehyde’s synthetic adhesive. The results indicate that lignin, α-cellulose, hemicellulose, and extractives ranged from 6.2–19.0%, 41.4–50.2%, 24.4–31.5%, and 6.8–18.8% respectively and they were significantly different from each other. Additionally, tannins, alkaloids, saponins, flavonoids, phenols, glycosides, and sterols were the phytochemicals present in biomass materials in different quantities. Also, carbon, oxygen, nitrogen, and boron were the elementals significantly present in the manufactured particleboards in the range of 35.3–52.8, 30.2–43.0, 4.2–24.0, and 3.2–9.9 percentage concentration respectively. As for the mechanical properties, it was verified that the cellulose content influenced 96.5% of the variability of the modulus of rupture (MOR) values. Understanding the distribution, functional properties, and impact of biomass organic, phytochemicals and elemental constitutions is an impetus to the improvement of processes with higher retention of these constitutions in the utilization of agroforest residues in the particleboard industry. These chemical compositions of the residues under study contributed largely to the characteristics of the manufactured particleboards.

ABSTRACT Background: Determining the basic density of the wood is usually defined as a simple process, but it requires caution and the operator’s skill to avoid errors in the analysis. In addition, it involves sample preparation and time to saturate the wood until obtaining the dry sample mass. The development of alternative measurement techniques could reduce the time to obtain the results and provide reliable values. Therefore, this study aimed to develop multivariate models to estimate the basic density of native woods using near-infrared spectra (NIR). Basic densities were determined by the water immersion method, and the values were associated with NIR signatures. Spectra were directly collected on the wood transversal and radial faces with an integrating sphere. Partial least squares regression (PLS-R) was calibrated and validated to estimate basic density based on spectral signatures. Results: In the cross-validation and prediction of the models, the results were promising. The coefficients of determination varied from 0.87 to 0.93 with a standard error of 0.01 %. The partial least squares discriminant analysis (PLS-DA) efficiently classified the wood species. The ratio of performance to deviation obtained satisfactory values, a minimum of 2.81 and a maximum of 4.20. Conclusion: The statistical parameters of the models based on NIR spectra showed potential for density measurements in floors, furniture, and solid wood products.

ABSTRACT Economic development based on cleaner industrial technologies has been increasingly studied in recent years. Cementitious composites reinforced with lignocellulosic fibers can be a sustainable alternative for use in engineering. The study aimed to evaluate the technological properties of cementitious composites produced from natural and industrial coconut fiber to compare the reinforcement with wood particles. Physical tests (density, water absorption, and thickness swelling) and mechanical tests (static bending) were carried out in four treatments, which varied the fiber and cement contents. It was found that treatment with natural coconut fiber had the lowest density value, 0.59 g/cm3, and treatment with industrial coconut fiber had the lowest water absorption value for the times and times of 2 and 24 h, 0.19, and 0.38%, respectively, and the treatment with wood particles, the highest values of modulus of elasticity and rupture, 1,897 MPa and 2.44 MPa. The study of the use of lignocellulosic materials as protection in cementitious composites is essential for applications in building constructions to reduce the environmental impacts generated by the generation of waste and use of non-renewable materials and to promote sustainable development.

ABSTRACT Were characterized microstructurally and mechanically the Ti-6Aℓ-4V alloy obtained through powder metallurgy in an uncontrolled atmosphere, varying the sintering parameters, arose. The samples were compacted in a uniaxial press at 874 MPa, 999 MPa, and 1124 MPa, and sintered without a protective atmosphere or vacuum, at 675 °C, 750 °C, and 850 °C. When sintering the material, the oxides influenced the results due to titanium’s high affinity for interstitial elements, promoting increased density and high hardness values. Based on the results, the treatment carried out at a pressure of 1124 MPa and a temperature of 750 °C showed the highest hardness in the beta phase (β), with a value of 1165.1 HV. In the alpha phase (α), the highest value was 1321.3 HV, presented by the treatment performed at a pressure of 999 MPa and a temperature of 850 °C. The high hardness values observed in the alloy are associated with the reinforcement promoted by the dissolution of Fe atoms. Materials with high hardness values use in the aerospace and biomedical industries, which always look for better mechanical resistance results, thus increasing their products’ useful life and applicability.

RESUMO Foram caracterizadas micro estruturalmente e mecanicamente a liga Ti-6Aℓ-4V obtida através da metalurgia do pó em atmosfera não controlada variando os parâmetros de sinterização. As amostras foram compactadas em uma prensa uniaxial à 874 MPa, 999 MPa e 1124 MPa, e sinterizadas sem atmosfera protetora ou vácuo, nas temperaturas de 675 °C, 750 °C e 850 °C. Ao sinterizar o material, houve influência dos óxidos nos resultados devido à alta afinidade que o titânio tem por elementos intersticiais, promovendo um aumento na densidade e elevados valores de dureza. A partir dos resultados verificou-se que o tratamento realizado na pressão de 1124 MPa e temperatura de 750 °C foi o que apontou a maior dureza na fase beta (β), sendo o valor de 1165,1 HV. Na fase alfa (α), o maior valor foi de 1321,3 HV, apresentado pelo tratamento realizado na pressão de 999 MPa e temperatura de 850 °C. Os elevados valores na dureza observados na liga estão associados ao reforço promovido pela dissolução átomos de Fe. Materiais com elevada dureza possuem uma vasta aplicação nas indústrias aeroespaciais e biomédicas, que buscam sempre por melhores resultados de resistência mecânica, aumentando assim a vida útil e a aplicabilidades de seus produtos.

Resumo Objetivou-se avaliar o efeito do tratamento térmico nas propriedades físicas da madeira de Buchenavia sp. Os tratamentos térmicos foram feitos em temperaturas de 180 °C e 200 °C durante 2 h. Avaliou-se a densidade aparente (AD), densidade básica (BD), porosidade (Ф), perda de massa, contração longitudinal (LS), radial (RS), tangencial (TS) e volumétrica (VS) e fator anisotrópico (AF). Os menores valores de densidade básica (0,67 g cm -3 ), densidade aparente (0,77 g cm -3 ) e porosidade (43,3%) foram observados para a madeira tratada em temperatura de 200 °C. As perdas de massa foram crescentes com o aumento da temperatura e os maiores valores foram observados na condição de 200 °C (9,3%). A LS e o AF não foram afetados pelos tratamentos térmicos. Os valores médios para RS (3,1%), TS (5,1%) e VS (9,1%) foram reduzidos após a realização dos tratamentos térmicos nas temperaturas de 180°C e 200 °C, que não diferiram entre si. Os tratamentos térmicos foram capazes de diminuir a instabilidade dimensional da madeira de Buchenavia sp. Os tratamentos térmicos potencializam o uso de madeiras da Amazônia de menor prestígio no mercado no contexto da construção civil.

Abstract This work aimed to evaluate the effect of heat treatment on the physical properties of wood from Buchenavia sp. The heat treatments were carried out at temperatures of 180 °C and 200 °C for 2 h. Apparent density (AD), basic density (BD), porosity (Ф), mass loss, longitudinal (LS), radial (RS), tangential (TS) and volumetric (VS) shrinkages and anisotropic factor (AF) were determined. The lowest values of basic density (0.67 g cm-3), apparent density (0.77 gcm-3), and porosity (43.3%) were observed for the wood treated at a temperature of 200 °C. Mass losses increased with increasing temperature and the highest values were observed under the condition of 200 °C (9.3%). The LS and AF was not affected by heat treatments. The mean values for RS (3.1%), TS (5.1%), and VS (9.1%) were reduced after the performance of heat treatments at temperatures of 180°C and 200°C, which did not differ from each other. The thermal treatments were able to reduce the dimensional instability of Buchenavia sp. Thermal treatments enhance the use of less prestigious Amazonian woods in the civil construction market.

RESUMO A durabilidade natural da madeira é essencial para a definição de seu uso, e essa propriedade pode ser potencializada com o tratamento químico adequado da madeira. Assim, o objetivo deste trabalho foi avaliar a resistência da madeira de Jacaranda copaia modificada quimicamente por acetilação a cupins e fungos apodrecedores. Cinco tratamentos experimentais foram avaliados: acetilação por 2, 4, 6 e 8 horas e um controle (não acetilado). A acetilação foi realizada por imersão das amostras de madeira em anidrido acético a 90°C. Amostras acetiladas e controle foram submetidas à ação de cupins xilófagos (Nasutitermes sp.) e fungos apodrecedores (Gloeophyllum trabeum e Trametes versicolor). O processo de acetilação aumentou significativamente a resistência da madeira de Jacaranda copaia ao ataque dos organismos xilófagos. Não houve perda de massa após exposição aos cupins da madeira em nenhum dos tratamentos de acetilação, enquanto na madeira controle a perda de massa foi de 9,5%. Em relação aos fungos em decomposição, ocorreu perda de massa em todos os tratamentos. Os tratamentos químicos mais eficientes foram os de acetilação por 6 e 8 horas, elevando a classe de resistência da madeira de Jacaranda copaia para altamente resistente.

ABSTRACT The natural durability of the wood is essential for the definition of its use, and this property can be enhanced with the proper chemical treatment of the wood. Thus, the objective of this study was to evaluate the resistance to termites and decay fungi of Jacaranda copaia wood chemically modified through acetylation. Five experimental treatments were assessed: acetylation for 2, 4, 6 and 8 hours and a control (non-acetylated). The acetylation was carried out by immersing wood samples in acetic anhydride at 90 °C. Acetylated and control samples were subjected to the action of xylophagous termites (Nasutitermes sp.) and decaying fungi (Gloeophyllum trabeum and Trametes versicolor). The acetylation process significantly increased the resistance of Jacaranda copaia wood to the attack of the xylophagous organisms. There was no mass loss after exposure to termites of the wood in any of the acetylation treatments, while in the control wood, mass loss was 9.5%. Regarding the decaying fungi, mass loss occurred in all treatments. Acetylation for 6 and 8 hours were the most efficient chemical treatments, increasing the resistance class of the Jacaranda copaia wood to highly resistant.

RESUMO O Brasil se destaca no cenário internacional em relação a produção de celulose de fibra curta. Apesar da grande biodiversidade brasileira, essa produção está baseada em clones de espécies exóticas de Eucalyptus. Nesse contexto, pode haver grande potencial na avaliação de novas fontes de fibras da flora brasileira, incluindo a região amazônica. O presente estudo teve como objetivo avaliar o potencial tecnológico da madeira de Ochroma pyramidale (Malvaceae) para produção de celulose kraft. Indivíduos de quatro anos de idade foram colhidos em um plantio comercial para produção de serrados no Estado do Mato Grosso. Determinamos as propriedades químicas (teores de holocelulose, lignina Klason, lignina solúvel, extrativos e cinzas), físicas (massa específica e porosidade) e morfologia de fibras (comprimento e largura de fibras, diâmetro do lume, espessura e fração de parede, coeficiente de flexibilidade, índice de enfeltramento e de Runkel) da madeira. Na polpação kraft a carga alcalina aplicada variou entre 10 e 24%, com intervalo de 2%. A madeira de Ochroma pyramidale apresentou características favoráveis à produção de polpa celulósica, como dimensões apropriadas das fibras e baixos teores de lignina, extrativos e cinzas. Os teores de álcali ativo residual e pH do licor negro apresentaram relação crescente com a carga alcalina aplicada nos processos de polpação. O acréscimo da carga alcalina reduziu o rendimento em polpação, número kappa, teor de rejeitos e aumentou o teor de ácidos hexenurônicos.

ABSTRACT Brazil stands out in the international scenario in the production of short-fiber pulp. Despite the great Brazilian biodiversity, that production is based on exotic Eucalyptus clones. In this sense, there may be great potential in the assessment of new sources of fibers from the Brazilian flora, including the Amazon. The present study aimed to assess the technical potential of the wood of Ochroma pyramidale (Malvaceae) for the production of kraft pulp. Four-year-old trees were harvested from a commercial forest for lumber production in Mato Grosso state (Brazil). We determined the wood’s chemical compositions (holocellulose, Klason lignin, soluble lignin, extractives and ash contents), physical properties (density and porosity), and fiber morphology (fiber length, width and thickness, lumen diameter, wall fraction, coefficient of flexibility, and slenderness and Runkel ratios). The wood was subjected to pulping with an effective alkali charge ranging from 10 to 24%, with intervals of 2%. Ochroma pyramidale wood presented characteristics favorable to the production of cellulosic pulp, such as appropriate fiber dimensions and low lignin, extractives, and ash content. The amount of residual active alkali and pH of the black liquor were positively related to the increase of the alkali charge employed in the pulping process. The increase of alkali charge decreased the pulp yield, kappa number and waste content, and increased the hexenuronic acid concentration.

ABSTRACT Thermal treatment can modify undesirable characteristics of some woods, dimensional instability, and excessive water adsorption. The present research work aimed to assess the effect of thermal treatment on the physical properties of clone GG100 Eucalyptus wood. Wood samples were obtained from 9 year-old trees. Samples were subjected to three types of thermal treatment (T1, T2, and T3). In T1, the wood was kept in a laboratory kiln at 100 °C for 180 min. In T2, hydrothermal treatment was performed in an autoclave at 120 °C for 120 min. In T3, the combined autoclave and laboratory kiln treatments were employed. The properties evaluated were apparent density (ρa); mass loss (ML); longitudinal (βl), radial (βr), tangential (βt), and volumetric shrinkage (βv); anisotropic factor; and equilibrium moisture content. The treatments caused a decrease of ρa and increase of ML. The Equilibrium Moisture Content (EMC) was lowest for T3, and had a negative correlation with ML, βt, and ∆v. The Pearson correlation analysis indicated the results of the thermal treatments were similar, but T1 presented the lowest variation of the physical properties compared to the other treatments, giving it the best predictability for practical uses.

Abstract Wood in civil construction has restrictions regarding its external use due to the actions of natural weathering, which can represent a real risk because they modify the characteristics of this material. This study aimed to evaluate the superficial deterioration of Trattinnickia rhoifolia (amescla), Parkia pendula (angelim), Erisma uncinatum (cedar), Apuleia leiocarpa (garapeira), and Mezilaurus itauba (itaúba) wood specimens exposed to natural weathering. For this purpose, wood samples were submitted to outdoor exposure on a metal platform, without contact with the ground, for 360 days. Every 60 days, the wood surface was characterized by colorimetry (L*, a*, b*, C*, h, and ΔE), roughness (Ra, Rz, and Rt), and hardness Rockwell. A darkened surface (grayish color) on the wood was observed after natural weathering, indicated by the decrease in the colorimetric parameters L*, a*, and b*. E. uncinatum wood presented the lowest values of the total color change (ΔE). In addition to the discoloration, weathered wood presented the highest values of surface roughness and the lowest values of Rockwell hardness due to the occurrence of surface cracks. A. leiocarpa and M. itauba woods presented greater stability of roughness and Rockwell hardness throughout the outdoor exposure.

Resumo A madeira na construção civil apresenta restrições quanto ao seu uso externo devido às ações do intemperismo natural, que podem representar um risco real pois modificam as características desse material. Neste estudo objetivou-se avaliar a deterioração da superfície das madeiras de Trattinnickia rhoifolia (Amescla), Parkia pendula (Angelim), Erisma uncinatum (Cedro), Apuleia leiocarpa (Garapeira) e Mezilaurus itauba (Itaúba) expostas ao intemperismo natural. Para tanto, amostras de madeira foram expostas às intempéries em uma plataforma metálica, sem contato com o solo, durante 360 dias. A cada 60 dias realizou-se a caracterização da superfície das madeiras por meio da colorimetria (L*, a*, b*, C*, h e ∆E), rugosidade (Ra, Rz e Rt) e dureza Rockwell. A exposição ao intemperismo natural tornou a superfície das madeiras mais escurecidas (coloração acinzentada), resultante da redução dos parâmetros colorimétricos L*, a* e b*. A madeira de E. uncinatum apresentou os menores valores de variação total da cor (∆E). Além da descoloração, as madeiras intemperizadas tornaram-se mais rugosas e com menor dureza Rockwell, devido à formação de fissuras superficiais. As madeiras de A. leiocarpa e M. itauba apresentaram maior estabilidade da rugosidade e da dureza Rockwell durante o período de exposição às intempéries.

Abstract: Measuring the natural resistance of wood is fundamental for proper use. The natural durability of five tropical wood species was investigated by field decay testing during exposure for 360 days. Wood logs (length of 0,5 m; diameter of 8 cm - 12 cm) were used in this study. The mass loss and decay index were calculated and visual analysis during the exposure time was performed for all samples. The samples presented evidence of two different groups concerning natural durability. The species in the first group (Mimosa caesalpiniifolia, Mimosa ophthalmocentra, and Mimosa tenuiflora) showed the highest resistance to biodeterioration, better or similar performance compared to treated Eucalypts wood (as control). The other group (Aspidosperma pyrifolium and Cordia oncocalyx) had lower natural resistance in outdoor service, being more susceptible to decay. In general, the wood of the first group is indicated for outdoor uses that require medium or prolonged exposure, such as timber stakes and fence posts.

RESUMO Os sistemas agroflorestais (SAFs) integram, com práticas sustentáveis, culturas agrícolas e florestais para produção de madeira e alimentos, conservando os serviços ambientais e a biodiversidade. O freijó, Cordia goeldiana, tem potencial para cultivo na Amazônia para fins madeireiros, porém dados sobre as características de sua madeira em SAFs são escassas. Objetivou-se determinar as propriedades físico-mecânicas e aplicações tecnológicas da madeira de freijó produzida em um SAF multiestratificado estabelecido no estado de Rondônia, Brasil em 1996. No SAF, as espécies agrícolas e madeireiras foram estabelecidas em renques duplos no espaçamento 5,0 m x 2,5 m. Abateram-se três árvores de freijó com 19 anos de idade, para caracterização química, física (densidade e estabilidade dimensional) e mecânica (compressão, flexão estática, dureza Janka e cisalhamento) da madeira. A madeira de freijó apresentou composição química similar à de madeiras nobres tropicais, peso moderado (582,63 kg m-3) e estabilidade dimensional elevada em comparação com outras madeiras consagradas no mercado (retração longitudinal, radial e tangencial = 0,25, 4,27 e 6,83%, respectivamente). Os valores de resistência à compressão paralela (32,32 MPa) e perpendicular (8.02 MPa), resistência específica (55,32 MPa kg-1 m-3), dureza Janka paralela (2373,33 N) e perpendicular (2326,67 N), resistência à flexão estática (63,5 MPa) e ao cisalhamento (5,94 MPa) foram semelhantes aos valores observados em outras madeiras tropicais de alta densidade, produzidas em monocultivo e florestas naturais. A madeira em estudo é adequada para fabricação de produtos de alto valor agregado, como móveis finos, pisos residenciais, instrumentos musicais e peças estruturais.

ABSTRACT Agroforestry systems (AFSs) integrate, through sustainable practices, agricultural and forest crops for the production of wood and food, providing environmental services, and conserving biodiversity. The freijó (Cordia goeldiana) has potential for cultivation in the Amazon for timber purposes, but data on the characteristics of its wood produced in AFSs are scarce. Our objective was to determine the physical-mechanical properties and suggest technological applications of freijó wood produced in a multi-stratified AFS established in the state of Rondônia, Brazil in 1996. Agricultural and forest species were established in the AFS in double rows with 5.0-m x 2.5-m spacing. Three 19-year-old freijó trees were harvested for chemical, physical (density and dimensional stability), and mechanical (compression, static bending, Janka hardness, and shear strength) characterization of the wood. The wood presented a chemical composition similar to tropical hardwoods, was moderately heavy (582.63 kg m-3), and had high dimensional stability in comparison with other consecrated woods on the market (longitudinal, radial, and tangential retraction = 0.25, 4.27, and 6.83%, respectively). The values determined for parallel (32.32 MPa) and perpendicular compression (8.02 MPa), specific strength (55.32 MPa kg-1 m-3), parallel (2373.33 N) and perpendicular Janka hardness (2326.67 N), strength to static bending (63.5 MPa), and shear (5.94 MPa) were similar to the values observed in other high-density tropical woods grown in either monoculture plantations or natural forests. The wood under study is suitable for manufacture of high-value-added products, such as fine furniture, residential floors, musical instruments and structural pieces.

ABSTRACT This work was carried out in a teak plantation in the state of Mato Grosso, Brazil. The objective was to evaluate technical and economic indicators of the cutting and processing of trees with a track harvester. Twenty complete work shifts were evaluated using direct thinning to determine operational cycle times. Other information was also recorded for the calculation of production costs. The second thinning was performed at 12 years, with a volume of 0.1648 m³/tree, and the third thinning at 18 years with 0.3408 m³/tree. The main finding was an increase in productivity and decrease in production costs with rising tree volumes. For each hour of effective work, 53 trees were cut (339 trees/day), and processed into 1,047 logs. The decrease in the cost of cutting and processing trees in proportion to the increase in the average volume of trees to be extracted was confirmed.

Resumo Neste estudo objetivou-se avaliar a resistência mecânica e a composição química das madeiras de Trattinnickia rhoifolia (amescla), Parkia pendula (angelim), Erisma uncinatum (cedro), Apuleia leiocarpa (garapeira) e Mezilaurus itauba (itaúba) expostas à deterioração em ensaios de campo. Para tanto, amostras de madeira foram parcialmente enterradas em ambientes de campo aberto e floresta, sendo expostas à deterioração durante 360 dias. Os testes foram realizados na cidade de Sinop, estado de Mato Grosso, Região Centro Oeste do Brasil. A cada 60 dias realizou-se a caracterização das madeiras deterioradas por meio de ensaios de flexão estática, para obtenção dos módulos de elasticidade e de ruptura, e de dureza Rockwell. A caracterização química (teores de extrativos, cinzas, lignina, holocelulose e solubilidade em hidróxido de sódio) das madeiras foi realizada antes e depois da exposição aos ensaios de deterioração. As madeiras de itaúba e garapeira apresentaram menores alterações na resistência mecânica e na composição química, em comparação às demais espécies, indicando uma maior durabilidade natural.

Abstract This study aimed to evaluate the mechanical strength and chemical composition of Trattinnickia rhoifolia (amescla), Parkia pendula (angelim), Erisma uncinatum (cedro), Apuleia leiocarpa (garapeira) and Mezilaurus itauba (itaúba) exposed to deterioration in field tests. To achieve this, wood samples were partially buried in outdoor and forest canopy, being exposed to deterioration for 360 days. The tests were carried out in the city of Sinop, state of Mato Grosso, Middle West of Brazil. Every 60 days, deteriorated wood was mechanically evaluated by the static bending tests, to obtain the modulus of elasticity and rupture, and hardness Rockwell. The chemical composition (extractives, ash, lignin, holocellulose and solubility in sodium hydroxide) were evaluated before and after the exposure to deterioration tests. Itaúba and garapeira wood presented lower change in mechanical resistance and chemical composition, in comparison to the other species, indicating a greater natural durability.

Resumo Objetivou-se analisar o efeito do tempo e da temperatura de tratamentos térmicos nas propriedades físico-mecânicas da madeira de cambará (Qualea paraensis Ducke). Foram confeccionados corpos de prova de 5 lotes da madeira de cambará submetidos ao tratamento térmico em estufa sob temperaturas de 180 °C e 200 °C e períodos de 2 h e 4 h. Determinouse densidade aparente (ρ12%), perda de massa (PM), umidade de equilíbrio (UE), contrações nos eixos longitudinal (βl), radial (βr) e tangencial (βt), contração volumétrica (βv) e fator anisotrópico (fa). Mecanicamente, a madeira foi avaliada quanto à resistência e rigidez nos ensaios de flexão estática (f M e EM) e compressão paralela às fibras (fc0 e Ec0). Após os tratamentos térmicos, os valores de ρ12% aumentaram, em média, 7,72% e a UE foi reduzida em 24,3%. Os maiores valores de PM (3,67%) foram observados para o tempo de exposição de 2 h em temperatura de 200 °C. Com este tratamento, obtevese também os menores valores de βt (5,73%) e βv (9,69%) . Os tratamentos térmicos aumentaram a densidade aparente, reduziram a umidade de equilíbrio e aumentaram a estabilidade dimensional da madeira. Na maioria dos tratamentos térmicos, observouse redução da resistência e aumento da rigidez à flexão estática. Ocorreu aumento da resistência e da rigidez à compressão paralela à grã em todas as combinações de tempo e temperatura. De modo geral, a maior estabilidade dimensional com menores perdas da resistência à flexão estática e compressão paralela foram obtidas com o tratamento de 200 °C e tempo de 2 h.

Abstract The objective was to analyze the effect of heat treatments on the physical and mechanical properties of Qualea paraensis wood. Test specimens from 5 lots of wood were submitted to heat treatments using temperatures of 180 °C and 200 °C with periods of 2 h and 4 h. Density (ρa), mass loss (PM), equilibrium moisture content (UE), longitudinal (βl), radial (βr) and tangential (βt) shrinkage, volumetric shrinkage (βv) and anisotropic factor (fa) were determined. Mechanically, the wood was evaluated for strength and stiffness in the tests of static bending (fM and EM) and compression parallel to the fibers (f c0 and Ec0) . After the heat treatments, the values of ρ12% increased, on average, by 7.72% and the UE was reduced by 24.3%. The highest values of PM (3.67%) were observed for the exposure time of 2 hours at a temperature of 200 °C. With this treatment, the lowest values of βt (5.73%) and βv (9.69%) were obtained. The thermal treatments increased the bulk density, reduced the equilibrium moisture content, and increased the dimensional stability of the wood. In most heat treatments, a reduction in strength and an increase in stiffness to static bending was observed. There was an increase in strength and stiffness to compression parallel to the grain in all combinations of time and temperature. The greatest dimensional stability with less loss of strength to static bending and parallel compression were obtained with the treatment at 200 °C and time of 2 h.